Poker Dot Wall Coat Hooks
from £4.65
Reclaimed and FSC sourced solid Oak timber coat hooks, all hooks
The hooks can be made from solid Oak but can be made from other timber on request. They are easily attached to a wall or door with a single screw and wall plug (all fitting are supplied).
These hooks are hand painted with a contrasting spotty pattern, they are all unique. The hooks come in two sizes long or short and angle or straight cut (how they sit against the wall). The first colour in select is the back ground and the second is the spots. There are many colour combinations and if you have something in mind just select the custom and let me know in the notes.
The peg hooks are very easily fixed in to walls or doors and all fixings are supplied, each hook comes with a universal wall plug and have a die cast M6 fitting inserted into the hook. The fixings are a steel M6 screw with a TX15 drive recess for easy installation.
To install
1. Drill a pilot hole in desired location for the wall plug
2. Place the plug in the pilot hole
3. Screw the fixing half way to the plug
4. Screw the hook in to position on the remainder of the fixing.
Note: if fixing to a timber structure the wall plug isn't required. If fixing to plaster board walls please fix to stud and if that’s no possible make note order specific plasterboard wall plugs and I all including them. Note: load capacity of plasterboard alone is significant less than securing to a solid wall, timber frames or wall studs.
Dimensions are:
Short Hooks - L: 7cm x Dia 3cm
Medium - L: 12cm x Dia 3cm
Long Hooks - L: 18cm x Dia 3cm
XLong Hooks - L: 24cm x Dia 3cm
The timber grain, texture and colour may vary slightly as some are reclaimed.
Note: the listing is for single hook.
The hooks can be made from solid Oak but can be made from other timber on request. They are easily attached to a wall or door with a single screw and wall plug (all fitting are supplied).
These hooks are hand painted with a contrasting spotty pattern, they are all unique. The hooks come in two sizes long or short and angle or straight cut (how they sit against the wall). The first colour in select is the back ground and the second is the spots. There are many colour combinations and if you have something in mind just select the custom and let me know in the notes.
The peg hooks are very easily fixed in to walls or doors and all fixings are supplied, each hook comes with a universal wall plug and have a die cast M6 fitting inserted into the hook. The fixings are a steel M6 screw with a TX15 drive recess for easy installation.
To install
1. Drill a pilot hole in desired location for the wall plug
2. Place the plug in the pilot hole
3. Screw the fixing half way to the plug
4. Screw the hook in to position on the remainder of the fixing.
Note: if fixing to a timber structure the wall plug isn't required. If fixing to plaster board walls please fix to stud and if that’s no possible make note order specific plasterboard wall plugs and I all including them. Note: load capacity of plasterboard alone is significant less than securing to a solid wall, timber frames or wall studs.
Dimensions are:
Short Hooks - L: 7cm x Dia 3cm
Medium - L: 12cm x Dia 3cm
Long Hooks - L: 18cm x Dia 3cm
XLong Hooks - L: 24cm x Dia 3cm
The timber grain, texture and colour may vary slightly as some are reclaimed.
Note: the listing is for single hook.
Secondary color:
Size:
Quantity:
Reclaimed and FSC sourced solid Oak timber coat hooks, all hooks
The hooks can be made from solid Oak but can be made from other timber on request. They are easily attached to a wall or door with a single screw and wall plug (all fitting are supplied).
These hooks are hand painted with a contrasting spotty pattern, they are all unique. The hooks come in two sizes long or short and angle or straight cut (how they sit against the wall). The first colour in select is the back ground and the second is the spots. There are many colour combinations and if you have something in mind just select the custom and let me know in the notes.
The peg hooks are very easily fixed in to walls or doors and all fixings are supplied, each hook comes with a universal wall plug and have a die cast M6 fitting inserted into the hook. The fixings are a steel M6 screw with a TX15 drive recess for easy installation.
To install
1. Drill a pilot hole in desired location for the wall plug
2. Place the plug in the pilot hole
3. Screw the fixing half way to the plug
4. Screw the hook in to position on the remainder of the fixing.
Note: if fixing to a timber structure the wall plug isn't required. If fixing to plaster board walls please fix to stud and if that’s no possible make note order specific plasterboard wall plugs and I all including them. Note: load capacity of plasterboard alone is significant less than securing to a solid wall, timber frames or wall studs.
Dimensions are:
Short Hooks - L: 7cm x Dia 3cm
Medium - L: 12cm x Dia 3cm
Long Hooks - L: 18cm x Dia 3cm
XLong Hooks - L: 24cm x Dia 3cm
The timber grain, texture and colour may vary slightly as some are reclaimed.
Note: the listing is for single hook.
The hooks can be made from solid Oak but can be made from other timber on request. They are easily attached to a wall or door with a single screw and wall plug (all fitting are supplied).
These hooks are hand painted with a contrasting spotty pattern, they are all unique. The hooks come in two sizes long or short and angle or straight cut (how they sit against the wall). The first colour in select is the back ground and the second is the spots. There are many colour combinations and if you have something in mind just select the custom and let me know in the notes.
The peg hooks are very easily fixed in to walls or doors and all fixings are supplied, each hook comes with a universal wall plug and have a die cast M6 fitting inserted into the hook. The fixings are a steel M6 screw with a TX15 drive recess for easy installation.
To install
1. Drill a pilot hole in desired location for the wall plug
2. Place the plug in the pilot hole
3. Screw the fixing half way to the plug
4. Screw the hook in to position on the remainder of the fixing.
Note: if fixing to a timber structure the wall plug isn't required. If fixing to plaster board walls please fix to stud and if that’s no possible make note order specific plasterboard wall plugs and I all including them. Note: load capacity of plasterboard alone is significant less than securing to a solid wall, timber frames or wall studs.
Dimensions are:
Short Hooks - L: 7cm x Dia 3cm
Medium - L: 12cm x Dia 3cm
Long Hooks - L: 18cm x Dia 3cm
XLong Hooks - L: 24cm x Dia 3cm
The timber grain, texture and colour may vary slightly as some are reclaimed.
Note: the listing is for single hook.
Reclaimed and FSC sourced solid Oak timber coat hooks, all hooks
The hooks can be made from solid Oak but can be made from other timber on request. They are easily attached to a wall or door with a single screw and wall plug (all fitting are supplied).
These hooks are hand painted with a contrasting spotty pattern, they are all unique. The hooks come in two sizes long or short and angle or straight cut (how they sit against the wall). The first colour in select is the back ground and the second is the spots. There are many colour combinations and if you have something in mind just select the custom and let me know in the notes.
The peg hooks are very easily fixed in to walls or doors and all fixings are supplied, each hook comes with a universal wall plug and have a die cast M6 fitting inserted into the hook. The fixings are a steel M6 screw with a TX15 drive recess for easy installation.
To install
1. Drill a pilot hole in desired location for the wall plug
2. Place the plug in the pilot hole
3. Screw the fixing half way to the plug
4. Screw the hook in to position on the remainder of the fixing.
Note: if fixing to a timber structure the wall plug isn't required. If fixing to plaster board walls please fix to stud and if that’s no possible make note order specific plasterboard wall plugs and I all including them. Note: load capacity of plasterboard alone is significant less than securing to a solid wall, timber frames or wall studs.
Dimensions are:
Short Hooks - L: 7cm x Dia 3cm
Medium - L: 12cm x Dia 3cm
Long Hooks - L: 18cm x Dia 3cm
XLong Hooks - L: 24cm x Dia 3cm
The timber grain, texture and colour may vary slightly as some are reclaimed.
Note: the listing is for single hook.
The hooks can be made from solid Oak but can be made from other timber on request. They are easily attached to a wall or door with a single screw and wall plug (all fitting are supplied).
These hooks are hand painted with a contrasting spotty pattern, they are all unique. The hooks come in two sizes long or short and angle or straight cut (how they sit against the wall). The first colour in select is the back ground and the second is the spots. There are many colour combinations and if you have something in mind just select the custom and let me know in the notes.
The peg hooks are very easily fixed in to walls or doors and all fixings are supplied, each hook comes with a universal wall plug and have a die cast M6 fitting inserted into the hook. The fixings are a steel M6 screw with a TX15 drive recess for easy installation.
To install
1. Drill a pilot hole in desired location for the wall plug
2. Place the plug in the pilot hole
3. Screw the fixing half way to the plug
4. Screw the hook in to position on the remainder of the fixing.
Note: if fixing to a timber structure the wall plug isn't required. If fixing to plaster board walls please fix to stud and if that’s no possible make note order specific plasterboard wall plugs and I all including them. Note: load capacity of plasterboard alone is significant less than securing to a solid wall, timber frames or wall studs.
Dimensions are:
Short Hooks - L: 7cm x Dia 3cm
Medium - L: 12cm x Dia 3cm
Long Hooks - L: 18cm x Dia 3cm
XLong Hooks - L: 24cm x Dia 3cm
The timber grain, texture and colour may vary slightly as some are reclaimed.
Note: the listing is for single hook.
