House Shaped Coat Hooks
£8.25
Reclaimed house shaped timber coat hooks, these wall mounted hooks are made from European Oak, American Oak, Beech, Birch, Ash and variety of other materials depending on the projects I'm currently working on.
The timber grain, texture and colour will vary slightly as they reclaimed materials.
The peg hooks are very easily fixed in to walls or doors and all fixings are supplied, each hook comes with a universal wall plug and have a die cast M6 fitting inserted into the hook. The fixings are a steel M6 screw with a TX15 drive recess for easy installation.
To install
1. Drill a pilot hole in desired location for the wall plug
2. Place the plug in the pilot hole
3. Screw the fixing half way to the plug
4. Screw the hook in to position on the remainder of the fixing.
Note: if fixing to a timber structure the wall plug isn't required. If fixing to plaster board walls please fix to stud and if that’s no possible make note order specific plasterboard wall plugs and I all including them. Note: load capacity of plasterboard alone is significant less than securing to a solid wall, timber frames or wall studs.
Dimensions are:
L: 70cm x W: 50mm x H: 90mm
The hooks can come painted or unfinished, If multiple hooks order I will match the timber type, thickness and colour unless advised otherwise on the order.
Note the listing is for single hook.
The timber grain, texture and colour will vary slightly as they reclaimed materials.
The peg hooks are very easily fixed in to walls or doors and all fixings are supplied, each hook comes with a universal wall plug and have a die cast M6 fitting inserted into the hook. The fixings are a steel M6 screw with a TX15 drive recess for easy installation.
To install
1. Drill a pilot hole in desired location for the wall plug
2. Place the plug in the pilot hole
3. Screw the fixing half way to the plug
4. Screw the hook in to position on the remainder of the fixing.
Note: if fixing to a timber structure the wall plug isn't required. If fixing to plaster board walls please fix to stud and if that’s no possible make note order specific plasterboard wall plugs and I all including them. Note: load capacity of plasterboard alone is significant less than securing to a solid wall, timber frames or wall studs.
Dimensions are:
L: 70cm x W: 50mm x H: 90mm
The hooks can come painted or unfinished, If multiple hooks order I will match the timber type, thickness and colour unless advised otherwise on the order.
Note the listing is for single hook.
Secondary color:
Quantity:
Reclaimed house shaped timber coat hooks, these wall mounted hooks are made from European Oak, American Oak, Beech, Birch, Ash and variety of other materials depending on the projects I'm currently working on.
The timber grain, texture and colour will vary slightly as they reclaimed materials.
The peg hooks are very easily fixed in to walls or doors and all fixings are supplied, each hook comes with a universal wall plug and have a die cast M6 fitting inserted into the hook. The fixings are a steel M6 screw with a TX15 drive recess for easy installation.
To install
1. Drill a pilot hole in desired location for the wall plug
2. Place the plug in the pilot hole
3. Screw the fixing half way to the plug
4. Screw the hook in to position on the remainder of the fixing.
Note: if fixing to a timber structure the wall plug isn't required. If fixing to plaster board walls please fix to stud and if that’s no possible make note order specific plasterboard wall plugs and I all including them. Note: load capacity of plasterboard alone is significant less than securing to a solid wall, timber frames or wall studs.
Dimensions are:
L: 70cm x W: 50mm x H: 90mm
The hooks can come painted or unfinished, If multiple hooks order I will match the timber type, thickness and colour unless advised otherwise on the order.
Note the listing is for single hook.
The timber grain, texture and colour will vary slightly as they reclaimed materials.
The peg hooks are very easily fixed in to walls or doors and all fixings are supplied, each hook comes with a universal wall plug and have a die cast M6 fitting inserted into the hook. The fixings are a steel M6 screw with a TX15 drive recess for easy installation.
To install
1. Drill a pilot hole in desired location for the wall plug
2. Place the plug in the pilot hole
3. Screw the fixing half way to the plug
4. Screw the hook in to position on the remainder of the fixing.
Note: if fixing to a timber structure the wall plug isn't required. If fixing to plaster board walls please fix to stud and if that’s no possible make note order specific plasterboard wall plugs and I all including them. Note: load capacity of plasterboard alone is significant less than securing to a solid wall, timber frames or wall studs.
Dimensions are:
L: 70cm x W: 50mm x H: 90mm
The hooks can come painted or unfinished, If multiple hooks order I will match the timber type, thickness and colour unless advised otherwise on the order.
Note the listing is for single hook.
Reclaimed house shaped timber coat hooks, these wall mounted hooks are made from European Oak, American Oak, Beech, Birch, Ash and variety of other materials depending on the projects I'm currently working on.
The timber grain, texture and colour will vary slightly as they reclaimed materials.
The peg hooks are very easily fixed in to walls or doors and all fixings are supplied, each hook comes with a universal wall plug and have a die cast M6 fitting inserted into the hook. The fixings are a steel M6 screw with a TX15 drive recess for easy installation.
To install
1. Drill a pilot hole in desired location for the wall plug
2. Place the plug in the pilot hole
3. Screw the fixing half way to the plug
4. Screw the hook in to position on the remainder of the fixing.
Note: if fixing to a timber structure the wall plug isn't required. If fixing to plaster board walls please fix to stud and if that’s no possible make note order specific plasterboard wall plugs and I all including them. Note: load capacity of plasterboard alone is significant less than securing to a solid wall, timber frames or wall studs.
Dimensions are:
L: 70cm x W: 50mm x H: 90mm
The hooks can come painted or unfinished, If multiple hooks order I will match the timber type, thickness and colour unless advised otherwise on the order.
Note the listing is for single hook.
The timber grain, texture and colour will vary slightly as they reclaimed materials.
The peg hooks are very easily fixed in to walls or doors and all fixings are supplied, each hook comes with a universal wall plug and have a die cast M6 fitting inserted into the hook. The fixings are a steel M6 screw with a TX15 drive recess for easy installation.
To install
1. Drill a pilot hole in desired location for the wall plug
2. Place the plug in the pilot hole
3. Screw the fixing half way to the plug
4. Screw the hook in to position on the remainder of the fixing.
Note: if fixing to a timber structure the wall plug isn't required. If fixing to plaster board walls please fix to stud and if that’s no possible make note order specific plasterboard wall plugs and I all including them. Note: load capacity of plasterboard alone is significant less than securing to a solid wall, timber frames or wall studs.
Dimensions are:
L: 70cm x W: 50mm x H: 90mm
The hooks can come painted or unfinished, If multiple hooks order I will match the timber type, thickness and colour unless advised otherwise on the order.
Note the listing is for single hook.
